M3G230/M4G950
2
secure password in order to limit data usage.
M3G230 and M4G950 both have built in dynamic DNS which makes the
router easy to find over the internet. The Port Forward software makes it
easy to find and connect to the different units in the application.
The router is not locked to any network provider. It is recommended to
choose a network provider where you can get SIM cards with a fixed rate
or sufficient data traffic since data usage can vary between applications.
Technical data
Communication
TCP/IP
WiFi
IEEE 802.11 b/g/n WiFi standard
Power supply
9-30 VDC. Wall adapter included.
Operation temperature
-40…+75°C
M3G230
Connections
RJ45 (1 LAN,1 WAN), WiFi
Mobile network
3G/GSM/GPRS/EDGE
Software
Open VPN, IPsec, GRE, L2TP, PPTP
Dynamic DNS, and DHCP server
SIM card
1
Dimensions (H x B x D)
74 mm x 83 mm x 25 mm
Weight
125 g
Power consumption
< 5 W
M4G950
Connections
RJ45 (3 LAN,1 WAN), WiFi
Mobile network
4G (LTE)/3G/GSM/GPRS/EDGE
Software
Open VPN, IPsec, GRE, L2TP, PPTP
Dynamic DNS, and DHCP server
SIM cards
2
Dimensions (H x B x D)
80 mm x 106 mm x 46 mm
Weight
250 g
Power consumption
< 7 W
Efficient use of the radio frequency spectrum
This product conforms to the requirements of the efficient use of the radio
frequency spectrum Article 3.2 of 1999/5/EG
through product
standards EN 301 511 v9.0.2, EN 301 908-1 v6.2.1, EN 301 908-2 v6.2.1,
EN 301908-13 v6.2.1, EN 300 440-1 v1.6.1, EN 300 440-2 v1.4.1, and
EN 300 328 v1.8.1
RF & Human Exposure
EN 50383:2010, EN 50385:2002, and EN 62311:2008
Low Voltage (LVD) Directive
This product conforms to the requirements of the European Low Volt-
age Directive (LVD) 2014/35/EU through product standards
LST EN 60950-1:2006, LST EN 60950-1:2006/A11:2009,
LST EN 60950-1:2006/A1:2010, LST EN 60950-1:2006/A12:2011 and
LST EN 60950-1:2006/A2:2013
Electro Magnetic Compatibility (EMC) Directive
This product conforms to the requirements of the EMC Directive
2014/30/EU through product standards EN 301 489-1 v1.9.2,
EN 301 489-1 v1.4.1, EN 301 489-1 v1.3.1, EN 301 489-1 v2.2.1, and
EN 301 489-1 v1.5.1
RoHS Directive
This product conforms to the directive 2011/65/EU through EN
50581:2012
Product documentation
Dokument
Typ
Manual M3G230
Manual with complete information
Product sheet M3G230
Short product information
Manual M4G950
Manual with complete information
Product sheet M4G950
Short product information
The product information can be downloaded from
www.regincontrols.com
Contact
AB Regin, Box 116, 428 22 Kållered, Sweden
Tel: +46 31 720 02 00, Fax: +46 31 720 02 50
www.regincontrols.com, [email protected]
Reset button
The router resets to its factory settings when the
reset
button on the
back side is pressed for at least 5 seconds. The router should be
powered during the button pressing.
Network settings
Dynamic IP-address and wireless network
1. Locate the network settings on the computer (e.g.
Control Panel ->
Network and Internet -> Network connections
)
2. Choose the wireless network and make sure that “
Internet protocol
version 4 (TCP/IPv4)”
is selected (
Figure 2
)
3. Check that the dynamic IP-address is configured.
Figure 2
Connect to the wireless network
1. Right click on the wireless network.
2. Select the network
Teltonika
and
connect
.
Product information
M3G230 and M4G950 are routers used between TCP/IP connected
controllers and a wireless, mobile network.
The routers have a built in DHCP function and can handle multiple
external units.
The router can be used as a WiFi hotspot. It is, however,
recommended to turn off the WiFi, or protect the network with a
