www.regentlight.co.za
www.regentlight.co.za
3
4
5
7
8
6
7
This product should be installed by a competent person i.e. Qualified electrician.
This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
The product must be regularly maintained, including the replacement of lamps/LED timeously.
This product could be HAZARDOUS if not used correctly, it could cause electric shock, serious bodily harm or death.
This product is not a toy, please keep away from children.
This product may contain small parts that can be swallowed.
Use only the correct light bulbs/LED as stipulated on the carton for the product.
Any modifications of this product after supply will result in the guarantee being void.
Spare parts may become unavailable over time.Items can vary slightly from the picture on the carton
Coastal humidity can affect the longevity of the light fitting over time.
Be sure to follow the steps in the order given.
Read instructions carefully.
Important Safety Instructions
5. To install or change the
lamp/LED, unscrew the
stainless steel screws on
the top of the lid and
remove the lid from the
main body, taking care
of any loose parts which
may fall.
Ensure the new lamp/LED
is the correct wattage,
a c c o r d i n g t o t h e
s p e c i f i c a t i o n a n d i s
securely located in the
lamp holder or securely
mounted on the base
plate.
7. Switch on the power
supply.
6. Replace the lid and
secure the lid to the
body.
E n s u r e t h e g a s k e t i s
securely in place before
fastening the lid to the
body.
4. Ensure that there are
no exposed conductors,
l o o s e s t r a n d s o r
t r a p p e d / p i n c h e d
insulation between the
pole and the spigot.
3. Place the spigot of the
post top on the pole,
align and tighten the M8
three grub screws.
Mark and drill a 8.5mm Hole
M8 Grub screw
