background image

1

2

www.regentlight.co.za

www.regentlight.co.za

INSTALLATION INSTRUCTIONS

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED  ELECTRICIAN

ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED  ELECTRICIAN

1

PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

Regent Lighting reserves the right to change specifications modify designs and discontinue items without incurring obligation and 

whilst  every  effort  is  made  to  ensure  that  descriptions,  specifications  and  other  information  in  this  catalogue  are  correct,  no 

warranty is given in respect thereof and the company shall not be liable for any error therein.

WARNING: 

TO AVOID FIRE, SHOCK OR DEATH

TURN OFF POWER  

AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING

ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS 

60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY

Electrical products can cause death, injury, or damage to property. Installation of this product 

must be carried out by a qualified electrician, in compliance with SANS 10142 or corresponding 

regulations of the country of installation. On completion of installation, the Certificate of 

Compliance must be updated.

WARNING

Electronic Control Device

Electronic Control Device

WARNING

3 - 13 MAIN REEF SERVICE ROAD, CORNER 

SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA, 

JOHANNESBURG. SOUTH AFRICA.

TEL : +27 11 474 0171

www.regentlight.co.za

REGENT LIGHTING A DIVISION 

OF WAHL INDUSTRIES. 

Save These Instructions for Future Reference

ELECTRIC SHOCK 
HAZARD

This equipment is to be
serviced by trained
personnel only.

ELECTRIC SHOCK 
HAZARD

This equipment is to be
serviced by trained
personnel only.

Longo

DO NOT CONNECT THE FITTING LIVE

March 2018

For non replacable lightsources:

The light source of this luminaire is not replaceable; when the 

light source reaches its end of life the whole luminaire shall be replaced

92MM

Product installed finished

with conduit drainage

FFL / Tiled Surface

Grout

Concrete

Drain

Product installed finished

with gravel drainage

Requirements:

Be sure the electricity to the system you are working on is  isolated.

If the main supply power (live) is on, it will cause damage to the luminaire. 

1. Select required position. 

Create a cavity with drainage for fitting in the ground/paving at the required position.  

The total height of the product is 92mm and 

SHOULD

 be level with the 

FINISHED floor level 

- FFL (the tiled surface)

.

*NB: GRAVEL FOR DRAINAGE - Lay at least 150mm of gravel beneath the well of the cavity 
and check drainage efficiency. 

Ensure there is a drain under the gravel when installing the fitting into paving or cement.

92MM

FFL / Tiled Surface

Grout

Concrete

Gravel

DO NOT PLUG 

(CONNECT) WHEN 

LIVE AS IT WILL CAUSE 

DAMAGE TO THE 

LUMINAIRE.

9

9. Place the fitting into the aluminium extrusion.

Connect to main supply using the electrical tail 
supplied from the fitting. 

Ensure the fitting is secure in the aluminium 
extrusion. 

Fitting 

Electrical 

tail 

Mains to 
Luminaire

Earth Loop 
Green/Yellow

Switch 
Live Red

Neutral loop 
Black or Blue

(L) Brown

 (E) Green/Yellow

(N) Blue

DO NOT PLUG 

(CONNECT) WHEN 

LIVE AS IT WILL CAUSE 

DAMAGE TO THE 

LUMINAIRE.

Отзывы: