Regency XALTA, Руководство пользователя

Страница: 43 / 57

ELECTRICAL SUPPLY REGENCY XALTA MOTORHOME
E l e c t r i c a l S u p p l y | 37
SYSTEM MONITORING
The system monitor panel, located in the rear cabinet on
the driver’s side interior, monitors the following systems:
Water Pump Switch
This switch controls the power to the water pump.
Press the top of the switch to turn on the water pump and
press the bottom of the switch to turn off the water
pump.
The switch light illuminates when the s witch is in the “ON”
position.
Tank Monitors
Depress the following switches to monitor the level of the
system capacity used/available on the LED display:
- BATT
o
Displays the battery power level
- FRESH
o
Displays the fresh water holding tank level
- GREY
o
Displays the grey water holding tank level
- BLACK
o
Displays the black water holding tank level
POWER DISTRIBUTION PANEL
The power distribution panel and the breaker panel
contain 120-Volt AC breakers.
Refer to the circuit breaker panel decal to identify the
function of each breaker.
Refer to the circuit fuse panel decal to identify the
function of each fuse.
120-Volt AC Circuit Breakers
The circuit breaker panel protects all 120-Volt AC
equipment and components in the motorhome from
overload, a short in the wiring or a short in the
component itself. In the event of an overload, the circuit
breaker cuts off the flow of electricity in the system and
helps prevent damage or fire.
If a circuit breaker “trips”, allow a brief cool down period
of 30-90 seconds, then reset the breaker by turning it
“OFF” and then “ON”.
If a circuit breaker “trips” repeatedly, the circuit is
overloaded or there may be a short in the wiring or in the
equipment and both should be checked and serviced by
qualified service personnel.
Refer to the converter and control panel manuals in the
Motorhome Information Bag for further details.