Regency PTO30-NG1, Инструкция для владельца и по установке

Страница: 12 / 44

12
|
Regency Plateau® PTO30-1 Outdoor Gas Fireplace
|
12
installation
FINISHING
Side nailing strips are adjustable for material from a minimum of 1/2" thick
up to a maximum of 2-3/8" thick.
Optional finishing trim is supplied with the PTO30 - place finishing trim on unit between unit and finishing material.
Note: If installing a PTO60 the optional trim on the PTO30 cannot be used and should be discarded. An optional trim (part number 377-957) can be pur-
chased for the PTO60.
Side nailing strips are adjustable in 1/4" or 1/8" increments. Each hole on
the inside line is 1/8", each hole on the outside line is 1/4"
Determine the thickness of the finishing material before adjusting the nailing
strips.
OPTIONAL FINISHING TRIM
1/2"
1/4" Increments
1/8" Increments
2-3/8"
Nailing strip
FINISHING MATERIALS:
This burner is designed to be finished with non-combustible materials (ie.
tile, granite, marble, brick, etc.) with a minimum thickness of 1/2" to a maxi-
mum thickness of 2-3/8".
Burner Opening Size
PTO30 36-7/16" x 8-1/4"
PTO60 66-7/16" x 8-1/4"
Min. 1/2"
Max. 2-3/8"
Important Note: Two (2) ventilation grills, (PTO30), Four (4) ventilation
grills (PTO60) are highly recommended for all enclosures.
This is to alleviate moisture and allow for air to circulate.
Minimum recommended size : 20" sq (508 mm ²) each.