Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 4A :
Insert
2 Glides(S)
into each
Foot Bracket(PED-J).
STEP 4B :
Attach each
Foot Bracket(PED-J)
to the
Lateral(PED-I)
by placing
1 Washer(W)
between the base and each wood
screw hole on the Foot Brackets
(Figure 2).
Then, insert
6 Long Bolts(P)
and
6 Wood Screws(M)
to attach to
Lateral(PED-I).
S
PED-J
M
P
P
P
P
P
P
M
M
M
M
M
PED-I
P
M
P
M
P
M
W
W
W
PED-J
Figure 2
S
PED-J
STEP 3 :
Pull out each drawer and find the black tabs at the end of the suspension. Lift one side up and press the other side down
simultaneously and pull the drawer out. This will unlock the drawer and release it. Repeat this for all drawers.
STEP 5 : Lateral Component is Reversible.
Decide on an orientation(Left and Right). According to the orientation that you choose,
remove 2 Cam Pin Covers in the location shown below.
Then insert a
Fine threaded Cam Pin(L)
into each of the revealed inserts.
L
L
L
L
Right Lateral
Left Lateral
71” Single Lateral Credenza • ONCSLF7124 • INSTRUCTIONS
CARTONS: TT7124, MP3524, PLF3624, LG2824
71” Single Lateral Credenza
Page 4
