L676-1 Sunrise Gas Fireplace
Regency L676-1 Sunrise Gas Fireplace
Clearance:
Dimension
Measured From:
A: Mantel Height
16-1/2” (419mm)
Minimum
B: Sidewall
14-3/4” (375mm)
Side of
fi
replace opening
C: Ceiling
52” (1321mm)
Top of
fi
replace opening
D: Mantel Depth
13” (330mm)
Maximum
E: Alcove Width
84” (2134mm)
Sidewall to Sidewall (Minimum)
F: Alcove Depth
36” (914mm)
Front to back wall (Maximum)
Clearance Requirements:
Combustible Mantels
Because of the extreme heat this
fi
replace emits, the mantel clearances
are critical.
Combustible mantel clearances from top of the front facing
are shown in the diagram below. Mantel may be installed anywhere in the
shaded area or higher.
Mantel Leg
Clearances
Combustible mantel leg
clearances as per diagram.
Clearances are from the
fi
nished edge of the
fi
replace
opening.
Mantel
Clearances
From Top of
Fireplace Opening
A
31-1/16”
B
26-1/2”
C
17-1/2”
D
16-1/2”
Note:
A non-combustible mantel may
be installed at a lower height if
the framing is made of metal
studs covered with a non-com-
bustible board.
Ensure the paint that is used
on the mantel and the facing is
“heat resistant” or the paint may
discolour.
Vertical Terminations:
Horizontal Terminations:
Installed
Close to Floor
Installed Close
to Ceiling
