Regency HZI390E-LP1 Скачать руководство пользователя страница 1

Страница: 1 / 60

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4

919-090b

MODELS: L390E-NG1 / L390EB-NG1 Natural Gas L390E-LP1 / L390EB-LP1 Propane
HZI390E-NG1 / HZI390EB-NG1 Natural Gas HZI390E-LP1 / HZI390EB-LP1 Propane

WARNING:
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Refer to
this manual. For assistance or additional information consult
an authorized installer, service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable vapours and
liquids in the vicinity of this or any other appliance.

Installation and service must be performed by an authorized
installer, service agency or the gas supplier.

FOR YOUR  SAFETY
What to do if you smell gas:
  Do not try to light any appliance
  Do not touch any electrical switch:

do not use any phone in your
building.

Immediately call your gas supplier

from a neighbour's phone. Follow
the gas supplier's instructions.

If you cannot reach your gas

supplier, call the fi re department.

L390E / HZI390E Gas Insert

Owners &

Installation Manual

Tested by:

Installer: Please complete the details on the back cover

and leave this manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

www.regency-fi re.com

02/27/13

Содержание HZI390E-LP1





























































Результаты поиска

Содержание HZI390E-LP1

Отзывы:

Бренды по названию

Популярные бренды

Regency HZI390E-LP1, Инструкция для владельца и по установке

Результаты поиска

Содержание HZI390E-LP1

Отзывы:

Бренды по названию

Популярные бренды