Regency F33-LPG1, Владельцы и установка

Страница: 18 / 28

18 Regency F33-1 Freestanding Gas Stove
MAINTENANCE
4) Disconnect gas line to stove.
5) Disconnect 3/8" NPT pipe from 90 o elbow on valve.
6) Disconnect the two (2) switch wires from valve.
7) Remove two (2) orifice bracket screws inside firebox.
8) Remove thermodisc to bracket by removing three (3) phil-
lips head M5 screws.
9) Remove front cover with Piezo Igniter by removing two (2)
sheet metal screws.
10) Loosen four (4) phillips head M5 valve mounting screws
from underside of firebox. Push valve assembly forward on
the teardrop slots and drop down.
11) Disconnect Piezo wire.
To remove valve from valve assembly, continue.
12) Remove two (2) thermopile wires.
13) Remove thermocouple with a 9 mm (metric) spanner.
14) Remove pilot nut with an 11 mm spanner.
15) Remove valve to orifice nut with a 13/16" spanner.
16) Remove inlet pipe with pipe spanner. Note orientation of 90 o
elbow.
17) Remove two (2) phillips head M5 screws on each side of the
valve.
18) Remove valve and remove gas out 90 o brass fitting. Note
orientation of fitting.
INSTALLING VALVE ASSEMBLY
1) To install a new valve assembly, reverse instructions for remov-
ing valve . See assembly steps 1-11.
2) Check for leaks and manifold pressure. See Gas Pressure Test
instructions.
3) To reinstall valve, reverse instructions for removing valve assembly,
steps 12-18.