Regency BERWICK, Инструкция для владельца и по установке

Страница: 11 / 24

Regency Berwick Fireplace Insert
11
installation
1) Remove the door from the unit by lifting it up off the hinges.
2)
Position the faceplate up against the unit by sliding the left side of
the fascia in behind the door hinges and align the 4 screw holes with
the holes in the firebox. Secure in place using 2 screws on top.
FACEPLATE & FAN INSTALLATION
3) Install the fan fascia by aligning the bottom screw locations with the
bottom faceplate. See page 13 for fan wiring diagram.
4) Re-install door.
5)
Install the draft plate cover by sliding the tabs into the tab brackets
on the inside top of the firebox, ensure the damper control rod fits
thru the opening in the draft plate cover.
Fan Fascia
6) Install knob on damper control rod.
Draft Plate Cover
Damper
Control Rod