16
|
Regency Bellavista™ B41XTE -10 Gas Fireplace
|
16
installation
UNIT ASSEMBLY PRIOR TO INSTALLATION
BEFORE YOU START
The Top Facing Support, the Side Nailing Strips, the 2 Top Standoffs and the Flue Collar must be correctly positioned and attached before the fireplace
is moved into position.
TOP STANDOFF ASSEMBLY
The top standoffs are shipped in a flat position and must be folded into shape and attached.
1) Remove the standoffs from the fireplace top.
2) Take each standoff and bend into the correct shape. Bend up at the bend lines until
the screw holes in the standoff and the pre-punched screw holes on the fireplace
top line up.
3) Attach the standoff securely to the top with 2 screws per standoff (on opposite
corners).
TOP FACING SUPPORT
Determine the total thickness of facing material (e.g. drywall or wood plus ceramic tiles) to
allow the finished surface to be flush with the front of the unit. Total facing thickness can vary
from 1/2" (13mm) to 1-1/4" (32mm) thick.
The Top Facing Support can be mounted in
3 different positions depending on the
thickness of the facing material.
1)
Mount Top Facing Support using the 3 supplied screws into the three pre-punched screw
holes on the top front of the unit. Use hole positions A, B, or C depending on your facing depth.
Screw
Facing Material
Position
Depth
A
1/2" / 13mm
B
7/8" / 22mm
C
*
1-1/4" / 32mm
*
For "C" screw position the top facing
support is reversed.
Top Standoff
(flat shipping
position)
Top Standoff
after bending
Top Facing Support
Top Facing
Support
Side
Nailing
Strip
Nail1.eps
Nail2.eps
Nail3.eps
Nail4.eps
Nail5.eps
bend
here
Before
Afte
r
A
A
B
C
B
C
Top Facing Support
is reversed
for “C” hole position
A
A
B
C
B
C
Screw holes for
Top Facing
Support
Screw holes
for Side
Nailing Strip
Before
Afte
r
Bend
here
Top Facing Support
Nail6.eps
A
B
C
Screw holes for
Top Facing
Support
Top Facing Support
is reversed
for “C” hole position
A
B
C
Top Facing
Support
Top Standoff
(flat shipping
position)
Top Standoff
after bending
Top Facing Support
Top Facing
Support
Side
Nailing
Strip
Nail1.eps
Nail2.eps
Nail3.eps
Nail4.eps
Nail5.eps
bend
here
Before
Afte
r
A
A
B
C
B
C
Top Facing Support
is reversed
for “C” hole position
A
A
B
C
B
C
Screw holes for
Top Facing
Support
Screw holes
for Side
Nailing Strip
Before
Afte
r
Bend
here
Top Facing Support
Nail6.eps
A
B
C
Screw holes for
Top Facing
Support
Top Facing Support
is reversed
for “C” hole position
A
B
C
Top Facing
Support
"C" Screw Position:
For a facing material depth of 1-1/4" (32mm),
the top facing support must be reversed.
Top Standoff
(flat shipping
position)
Top Standoff
after bending
Top Facing Support
Top Facing
Support
Side
Nailing
Strip
Nail1.eps
Nail2.eps
Nail3.eps
Nail4.eps
Nail5.eps
bend
here
Before
Afte
r
A
A
B
C
B
C
Top Facing Support
is reversed
for “C” hole position
A
A
B
C
B
C
Screw holes for
Top Facing
Support
Screw holes
for Side
Nailing Strip
Before
Afte
r
Bend
here
Top Facing Support
Nail6.eps
A
B
C
Screw holes for
Top Facing
Support
Top Facing Support
is reversed
for “C” hole position
A
B
C
Top Facing
Support
SIDE NAILING STRIPS
The side nailing strips come attached to the unit.
There are 2 plates, one on the top and bottom
that can be folded out as required depending on
the facing depth as per chart shown.
Facing Material
Depth
1/2" / 13mm
7/8" / 22mm
1-1/4" / 32mm
