5
TROUBLESHOOTING
Problem
Possible Cause
Corrective Action
The pump does
not start or run.
The fuse is blown
Replace the fuse
The breaker is tripped
Reset the breaker
The plug is disconnected
Secure the plug
The plug is corroded
Clean the plug prongs
The brushes are worn
Replace the brushes
The motor is overheated
Unplug from power and wait for 30 minutes,
then plug power cord back in
The pump does
not prime
The suction line is leaking air
Repair the suction line by tightening hose
connection or replacing hose washer if
necessary
The impeller is clogged
Remove the blockage
The impeller is worn or
damaged
Replace the impeller
The impeller is dry
Add water to the pump inlet
The flow rate is
too low
The hose is kinked or coiled
Straighten the hose
The strainer or hose is blocked
Clean the strainer or hose
The discharge hose is too long
Shorten the hose (50 ft. max.)
The impeller is worn
Replace the impeller
