Grandview
®
G600C-1 Gas Fireplace
|
11
owner's information
Before You Start
Safe installation and operation of this appliance
requires common sense, however, we are required
by the ANSI Standards to make you aware of the
following:
CHILDREN AND ADULTS SHOULD BE
ALERTED TO THE HAZARDS OF HIGH
SURFACE TEMPERATURES, ESPE-
CIALLY THE FIREPLACE GLASS, AND
SHOULD STAY AWAY TO AVOID BURNS
OR CLOTHING IGNITION.
INSTALLATION AND REPAIR SHOULD
BE DONE BY AN AUTHORIZED
SERVICE PERSON. THE APPLIANCE
SHOULD BE INSPECTED BEFORE
USE AND AT LEAST ANNUALLY BY A
PROFESSIONAL SERVICE PERSON.
MORE FREQUENT CLEANING MAY
BE REQUIRED DUE TO EXCESSIVE
LINT FROM CARPETING, BEDDING
MATERIAL, ETC. IT IS IMPERATIVE THAT
CONTROL COMPARTMENTS, BURNERS
AND CIRCULATING AIR PASSAGEWAYS
OF THE APPLIANCE BE KEPT CLEAN.
DUE TO HIGH TEMPERATURES, THE
APPLIANCE SHOULD BE LOCATED
OUT OF TRAFFIC AND AWAY FROM
FURNITURE AND DRAPERIES.
WARNING: FAILURE TO INSTALL THIS
APPLIANCE CORRECTLY WILL VOID
YOUR WARRANTY AND MAY CAUSE A
SERIOUS HOUSE FIRE.
CLOTHING OR OTHER FLAMMABLE
MATERIAL SHOULD NOT BE PLACED
ON OR NEAR THE APPLIANCE.
YOUNG CHILDREN SHOULD BE CARE-
FULLY SUPERVISED WHEN THEY ARE
IN THE SAME AREA AS THE APPLI-
ANCE. TODDLERS, YOUNG CHILDREN
AND OTHERS MAY BE SUSCEPTIBLE
TO ACCIDENTAL CONTACT BURNS. A
PHYSICAL BARRIERS IS RECOMMEND-
ED IF THERE ARE AT RISK INDIVIDUAL
IN THE HOUSE. TO RESTRICT ACCESS
TO A FIREPLACE OR STOVE, INSTALL
AN ADJUSTABLE SAFETY GATE TO
KEEP TODDLERS, YOUNG CHILDREN
AND OTHER AT RISK INDIVIDUALS OUT
OF THE ROOM AND AWAY FROM HOT
SURFACES.
ANY SAFETY SCREEN, GUARD, OR
BARRIER REMOVED FOR SERVICING
THE APPLIANCE, MUST BE REPLACED
PRIOR TO OPERATING THE APPLIANCE.
IF THE BARRIER BECOMES DAMAGED,
THE BARRIER SHALL BE REPLACED
WITH THE MANUFACTURER'S BARRIER
FOR THIS APPLIANCE.
A BARRIER DESIGNED TO REDUCE
THE RISK OF BURNS FROM THE HOT
VIEWING GLASS IS PROVIDED WITH
THIS APPLIANCE AND SHALL BE
INSTALLED FOR THE PROTECTION
OF CHILDREN AND OTHER AT-RISK
INDIVIDUALS
Important Information on the
G600C-1
On Demand Pilot (seven day safety timer) (Ap-
proved for use in both Canada/USA)
This appliance is a Millivolt Standing Pilot system
fitted with the "On Demand" Pilot, a safety feature
which will shut down the gas valve completely by
extinguishing the pilot light in the event of a continu-
ous full seven days of inactivity.
Each time the main burner shuts down, manually
or through the call from the thermostat, the seven
day timer starts again.
While on these Standing Pilot Systems the control
valve is controlled manually, the seven day inactivity
timer is controlled by a circuit board. Therefore, if
and when the pilot light is extinguished after seven
straight days of inactivity, the control knob will remain
in the "ON" position and the pilot will be unable
to be re lit until the pilot control knob is manually
returned to the "OFF" position in order to facilitate
and to restart the ignition and relighting process.
If the unit never goes as long as seven full days
without a call for heat, the pilot will remain lit until it
is manually shut-off.
See the instructions in this manual and on the
Lighting Instructions plate on the appliance to light
or relight the pilot.
Содержание Grandview G600C-1
Страница 98: ...98 Grandview G600C 1 Gas Fireplace notes ...
Страница 99: ... Grandview G600C 1 Gas Fireplace 99 notes ...
