10
L
IGHTING
O
PERATIONS
Lighting functions are controlled by the pull chain switch located on the switch housing opposite the speed control
pull chain switch. Operating functions are controlled by four pulls of the light switch.
One Pull:
Mood lighting (motor housing lights)
Two Pulls:
Down lighting (lighting fixture)
Three Pulls:
Both Mood and Down lighting
Four Pulls:
Off
M
OTOR
H
OUSING
B
ULB
R
EPLACEMENT
R
EPLACE
M
OOD
L
IGHTING BULBS LOCATED IN
M
OTOR
H
OUSING
:
1. Turn power off at fuse box.
2. Remove the four mounting screws (6.5mm) that hold the lighting assembly.
3. Loosen the four mounting screws (8mm) that hold the bulb socket to the mounting bracket. Do not remove –
loosen only by one or two turns. NOTE: These screws are the larger ones and are screwed into a raised mount are a .
4. With sockets loose fro m
mounting bracket, slowly
lift the assembly up and
work assembly loose
f rom motor housing.
5. Once assembly is fre e ,
remove burned out bulb
from socket and replace
with new bulb.
NOTE:
Consider replacing all
four bulbs if one burns
out, since it may not be
long before the others
will also need to be
replaced.
D O N O T O V E RT I G H T E N
BULBS.
6 . Reassemble fan in re v e r s e
o rder and tighten all
s c rews that had been
removed or loosened
during procedure.
