English
9
STEP 7
Connect the assembled gate to the wall by inserting
the flat ends of the
threaded rods
into the semi-circle
slot at the bottom of each
maxi mounting bracket
.
Adjust the length of the
threaded rods
appropriately
to allow for installation. After proper insertion, the
threaded rods
will lock in place.
STEP 8
Adjust the
threaded rods
so that an equal amount
of spacing is distributed between the 4 corners.
Then, using a wrench, tighten the locking
nuts to lock the gate in place.
NOTE:
Install one side of the gate completely before attempting to install the
second side.
NOTE:
The maximum length of the exposed threaded rods should not exceed
2.5 inches.
Содержание 1190
Страница 2: ......