CONECTING TO A V-GREEN MOTOR
Figure 5: Terminal Box Cover Removed
6
The automation adapter must be wired according to the locally adopted version of the
NEC. A licensed, qualified electrician should complete the wiring for this product.
Failure to comply with this may result in death, serious personal injury or
property damage.
NOTE:
Refer to manufacturer’s instructions for wiring on all other products
other than the automation adapter.
The following steps should be followed to connect the automation adapter to a
V-Green motor.
1.
Disconnect all power sources from the motor and wait five minutes.
2.
Remove the terminal box cover from the controller (two screws).
