background image

£¨

left

£©

31

      1.The fluid disc brake operates under high 
pressure the fluid at the frequency interval no 
longer than that has been established in the 
manual.
      2.If it is necessary to maintain the brake 
system or the disc, go to your authorized 
service dealer for the sake of safety.

WARNING

[Brake Disc]
      The brake disc will be worn after being used for a period of time. In order to ensure that the brake 
system can function properly and reliably, replace the disc when it is extremely worn.
      The limit of motorcycle brake disc is 3.5mm, the same marked on the brake disc.

      Don not ride your motorcycle after you have 
just replaced the disc with a new one. Grasp and 
release the front brake lever several times until 
the brake disc fits the brake calipers well, thus 
returning the front brake lever to normal free play.

[Brake System]
      Pre-ride inspection must be performed 
every day on the following item:

      a)

Check the fluid lever in the fluid 

reservoir;

      b)

Check the brake system for fluid 

leakage;

      c)

Check the fluid tube and the reservoir 

for leaks or cracks;

      d)

Check wear of the brake disc;

      e)

Ensure the right and A. unchanged 

free play for the front brake lever at any
time.

WARNING

Wear mark

Brake disc

 (Left)Brake calipers

Содержание DAYTONA 125

















































Отзывы: