Rega Ear, Руководство пользователя, Страница: 4 / 6

control is where the level of the headphones is the same as that of the main speakers
(the volume level on the Ear should be approximately 12:00 hours on the dial).
METHOD 4
When using seperate pre amplifier and power amplifier combination, you may use the Ear
in-between a pre-amplifier output and power amplifier input, the Ear will amplify any
signal fed to a pre-amplifier output and the link will feed the required power amplifier.
The volume control on the pre-amplifier will control the headphone level and the main
speakers can be muted via the Ear.
Connect the two sockets on the back marked INPUT (Red = Right, Black = Left) to the pre-
amplifier output sockets on the back of the pre-amplifier. The two sockets on the back
marked LINK (Red = Right, Black = Left) are connected to the input sockets on the back
of the power amplifier.
The mute on the front panel of the ear will mute the signal to the speakers connected to
the power amplifier. The volume control on the pre-amplifier and the volume control on
the Ear will affect the volume level of the headphones. The best setting for the Ear volume
control is where the level of the headphones is the same as that of the main speakers
(the volume level on the Ear should be approximately 12:00 hours on the dial).
To prevent possible hearing damage, do not listen at high volume for long periods.