REFRIND S.r.l.
Via B.Colleoni 35-37,24060 Gorlago (BG)
Title:
Manuale - Manual (IT-ENG-RUS) -
Инструкция
Rev.04
File: CDH-CDZ MAN-1102075003
Page
19/29
This documentation is under Refrind S.r.l. property and contain legally privileged and/or confidential information. Any
use, distribution, reproduction or disclosure by any other person is strictly prohibited without owner permission.
2.8
Warnings
The unit is designed and built to guarantee the maximum safety.
ATTENTION
: High temperatures of some internal components during the
working cycle is possible.
ATTENTION
: power supply must be disconnected before any maintenance
operation is performed.
ATTENTION
: The refrigerant inside the cooling circuit is pressurized (R134a)
ATTENTION
: maintenance operations should be performed by qualified
personnel
2.9
Demolition and dismantling
Before recycling the unit, the refrigerant fluid shall be collected using proper
equipment.
Make sure not to release refrigerant into the atmosphere
: to avoid any risk of
environmental pollution, R134a must be stored in special containers, which will
be disposed of by authorized companies.
The compressor contains lubricating oil to be collected and disposed of
according to local regulations.
Only after properly removed the refrigerant and oil lubricant, the unit can
be disposed of without further precautions.
Collect components in different ways according to the regulations (iron,
aluminum, plastic, copper, steel, ...).
