Reflexion PS20BT, Руководство пользователя

Страница: 27 / 30

27
Device already paired
1. Press the [FUNC.] Button repeatedly until (Bluetooth) appears on the display.
2. If the last paired device is within range, the sound machine will automatically connect to this
device.
3. If the last connected device is out of range or if the Bluetooth function is deactivated on the
playback device, the sound machine switches to pairing mode after a while to start a new
connection with another device.
Notes:
- Bluetooth works best within 10 meters.
-
The "Pair" indicator only flashes if no Bluetooth device is connected.
-
After switching on the device, the PS20BT connects to the last paired device, if within range.
AUX IN MODE
Press the [FUNC.] Button repeatedly until the desired mode (AUX IN) appears on the display.
1. Plug a 3.5mm audio cable (not included) with one end into the
“AUX-IN”
socket of the
“PS20BT”
and the other end into your external device.
2. You control playback with the connected external device.
3. Set the volume on the "PS20BT" . You can readjust the volume on the external device.
TWS FUNCTION
You can connect two
“PS20BT”
models to a stereo system using the
“TWS function”
.
1. Switch the first device to "Bluetooth mode" .
2. Switch the second device to
“Bluetooth mode”
and hold the [BT / ] button down for
approx. 3 seconds.
3. The devices connect automatically. A signal tone sounds and the two devices are connected.
-
Master device: "TWS R" is shown in the display.
- Slave device: "TWS L" is shown in the display.
4. The two devices are now connected as a stereo system.
5. Playback can be controlled with both devices.
6. The volume can be set individually on both devices.
7. To end the TWS function, press and hold the the [BT / ] button on the second unit. The
connection is terminated.
MICROPHONE SOCKET
The microphone input is available in all modes. You can speak into the microphone during or without
playback.
1. Connect the supplied microphone to one of the two 6.3mm microphone sockets on the top of the
device.
2. Set the [MIC.VOL] control to the desired volume.