PVR RECORDING FUNCTION
1.
Insert an empty USB stick or hard drive into the USB socket of the device.
2.
Press the [MENU] button and navigate to "Configuration".
3.
Press the [OK] button and select the menu item PVR file system.
4.
Press the [OK] button to open the menu.
5.
The following menu items are available in the menu.
Select disc:
Select the storage location.
Check PVR file system:
Press the OK button to check the USB medium.
Format:
Press the OK button to prepare the USB medium for
recording.
Time Shift Size:
Shows the maximum file size for the time shift function.
Speed:
Displays the USB medium recording speed.
Remaining recording time:
Displays the remaining recording time in hours.
Note:
While a USB medium is being prepared for recording, all data from the USB medium is
deleted.
You cannot switch during recording.
The recording function is only available for non-encrypted TV channels / programs.
Programming EPG recording
1.
Press the EPG button.
2.
Use the [▲ ▼] buttons to select a TV program.
3.
Press the [►] button to switch to the TV programs.
4.
Use the [▲ ▼] buttons to navigate and search for the desired TV show.
5.
Press the [Red] button to mark the TV show for recording.
6.
By repeatedly pressing, you can change the recording function or delete the recording again.
R:
Starts a one-time recording
D:
Starts a daily recording for programs daily at the same time be broadcast.
W: Starts a weekly recording for broadcasts once a week be broadcast.
Programming manual recording
1.
Press the [MENU] button and navigate to "Transmitter".
2.
Press the [OK] button and go to "Timer list".
3.
Press the [OK] button to open the menu.
4.
Existing timers are displayed in the menu or new timers can be set. The timers made in the
EPG menu are also displayed here.
5.
The following settings are available in the menu.
Delete:
Press the [Red] button to delete a highlighted timer.
New:
Press the [Yellow] button to create a new timer.
Program:
Select current program.
Type:
Reminder / RECORDER
Mode:
Once / Daily / Weekly
Start time:
Set the time and date.
End time:
Set the time and date.
Edit:
Press the [Blue] button to edit an existing timer.
Exit:
Press the [Exit] button to exit the menu.