TM
Button
Indicator light
Charging leads
SleepAngles Monitor
Quick Start
1 Install the Base Station. Please refer to the RX901 instruction manual.
2 Visit www.SleepAngles.com
3 Click on “New User”
i Enter personal information, email address and password
4 Click on “Add a Base Station”
i. Enter the Base Station Serial # and click on “Add”
(base station serial number is located on its back)
5 Click on “Add a Device”
i. Enter the SleepAngles Monitor Serial # and click on “Add”
(device serial number is located next to the charging leads)
*skip the steps above if information has been provided to you
TM
SN:xxxx-xxxx-xxxx-xxxx
