z
z
z
7
INSTRUCTIONS FOR OPERATING
Cleaning
When the red “CLEAN CELL” indicator is blinking, please restart your appliance. If the red “CLEAN
CELL” indicator is still blinking, please clean your collector cell.
When the red “CLEAN CELL” indicator illuminates or collector cell is too dirty or if snapping sounds
become frequent, please clean your collector cell.
Please follow your User's Guide to clean.
Proper care and cleaning of the air purifier is critical to performance. The following chart shows the
cleaning intervals and method.
Cleaning the Pre-Filter
Unplug the appliance.
Open the front cover by gently pulling from the
top corners.
Pull the pre-filter straight out of the cabinet.
Thoroughly rinse the pre-filter and let it air dry
before placing it back in the cabinet. Do not use
heated or compressed air as part of the drying
process.
Slide the pre-filter back into the unit.
Close the front cover securely.
1.
2.
3.
4.
5.
6.
1
2
3
C) Operation with catalyst
Button C is used for switching the catalyst on and off (Symbol “UV+TIO ” lights up). This
2
appliance combines advanced catalytic technologies to reduce odors and chemical fumes from
glues, solvents, and synthetic materials when air passes through the filter and is activated by the
internal UV LED. (The catalyst system cannot be removed) If turned off, the appliance will
continue to filter particles from the air that passes through the filter but its odor and VOC
capability will be greatly reduced.
6
INSTRUCTIONS FOR OPERATING
Control Panel Instructions
D) Timer
Using button D , the operation time can be set-adjustable between 1~9 hours or continuous
operation (circulated
), Symbol J shows the operating period that has been set (1h/2h/3h/4h
/5h/6h/7h/8h/9h/ circulated
). The display will automatically show the current value after a few
seconds.
E) Night mode
By pressing the button E once, the night mode is switched on which automatically dims the
display brightness, appliance continue to operate under with silence technology. If button E
pressed again, the appliance will not longer be in night mode.
F) Cleaning indicator
If red “CLEAN CELL” indicator appears on the display, the appliance should be cleaned as
recommended by the manufacturer. When the collector cell is re-installed after cleaning, switch
on the appliance and keep pressing the button E at least 3 seconds until buzzer beeps, red
“CLEAN CELL” indicator goes out and “CLEAN CELL” timer is reset.
G) Catalyst indicator
H) Replace indicator
If red “REPLACE FILTER” indicator appears on the display, the VOC/Formaldehyde filter should
be replaced as recommended by the manufacturer. When the VOC/Formaldehyde filter is reins-
talled after replacement, switch on the appliance and keep pressing the button D at least 3
seconds until buzzer beeps, red “REPLACE FILTER” indicator goes out and “REPLACE FILTER”
timer is reset.
I) Fan speed indicator
J) Timer indicator
Part
Cabinet
Collector Cell
Pre-Filter
Air Direction Grille
Cleaning Time
As needed
4 to 8 weeks
2 to 4 weeks
As needed
Method
Wipe with damp cloth first. If required, follow with mild,
non-abrasive cleaner.
Spray specialized cleaner or soak in warm water or warm
water with mild liquid detergent. Rinse and dry.
Rinse thoroughly in warm water or as needed.
Use the brush provided with the air purifier to brush away
debris in between the slots.
Warning
Cleaning the unit while it is plugged in may rusult in electric shock, electric spark and serious injury.
Unplug the unit before cleaning or maintenance.
VOC/Formaldehyde
Filter
6 to 12 months
or as needed
Replace with a new filter.
z
z
z
z
z
z
