Installation Instructions
16K Sidewinder
TM
©
2009, 2016 Cequent Performance Products - Printed in Mexico
Sheet 11 of 12
SW16KIN
10/25/16
Rev. J
Form: F205 Rev A 5-6-05
BEFORE EACH TRIP:
1. CHECK YOUR EQUIPMENT: Check the condition of all of your towing equipment and keep it in top condition.
2. Check that the torque of the (4) cap bolts is 45 ft-lbs, refer to figure 14 in this manual.
3. Check to see that all bolts are properly tightened.
4. Check wedge engagement in the fifth wheel jaw, refer to wedge adjustment portion of this manual.
MAINTENANCE:
1.
For ease of hookup: frequently lubricate the wedge surfaces, around the king pin, and the skid plate surface, apply a
lithium grease to the bearing surfaces as described in the assembly section of this manual. (Note: Resistance is typical
in the Sidewinder™ arm)
2.
Keep pin-box hitch painted to prevent rust and maintain a good appearance. (Do Not paint over labels)
3.
At least once per season, disassemble unit to clean, inspect, lubricate and re-torque fasteners.
