TO UNREEL CABLE:
Place handle in the forward position and disengage the lever pawl (figure 2) by pushing the thumb control lever
release to the up position (figure 1). Then disengage the retainer pawl by holding the end of the retainer pawl
release tab (figure 3) against the frame allowing the reel to spin freely when the cable is pulled out. Cable length is
6 feet.
TO TIGHTEN CABLE:
Push the thumb control lever release to the down position (figure 4) to engage the lever pawl with ratchet wheel.
Raise handle to tighten cable. Lower handle to ratchet . Repeat as needed.
TO RELEASE CABLE TENSION:
Ensure the load is secured and will not move.
Disengage lever pawl by moving thumb control lever to up position
(figure 1).
Move cable puller handle toward the end with fixed hook, and push handle all the way until the lever
pawl pushes against the retainer pawl.
This will release cable tension one tooth at a time.
Repeat until all tension
is released on the cable.
Thumb control lever release in down
position
FIGURE 4
OPERATION
Thumb control lever release in up position
FIGURE 1
Lever pawl
FIGURE 2
Retainer pawl release tab
FIGURE 3
PREVENTIVE MAINTENANCE
Every 6 to 12 months lubricate all moving parts and friction points with a light oil. Wipe down cable with light oil on
a rag to help prevent corrosion.
3
