Reer VISION MXL, Инструкция по установке, эксплуатации и обслуживанию

Страница: 17 / 35

VISION MXL
16 8540687 • 29/03/2010 • Rev.10
RECEIVER CONNECTIONS
MXL L / MXL T MXL / MXL U
12 poles M16 connector
PIN COLOR NAME TYPE DESCRIPTION FUNCTIONING
D
GREY
SUPPLY_A - Supply A
SUPPLY_A : 0Vdc
SUPPLY_B : 24Vdc
MANUAL
(see Table 4)
B GREEN SUPPLY_B - Supply B
SUPPLY_A : 24Vdc
SUPPLY_B : 0Vdc
AUTOMATIC
(see Table 3)
H PURPLE FE - Ground connection -
A GREY-PINK OSSD1 OUTPUT
K YELLOW OSSD2 OUTPUT
Static safety outputs PNP active high
L BROWN SENSOR1 INPUT
M BLUE SENSOR2 INPUT
Muting sensors
< 5VDC (with <3mA) :
sensor free
11÷30 VDC (with 6
÷
30mA):
sensor occupied
J
RED-BLUE
FBK_K1K2/
RESTART
INPUT
External contactors
fe
RESTART input
F RED OVERRIDE INPUT Override request
C
WHITE
MUTING
ENABLE
INPUT
Muting enabling
request
E
PINK
TIMEOUT INPUT Timeout Selection
< 5VDC (I <3mA) : OFF
11÷30 VDC (I = 6
÷
30mA): ON
G BLACK MUT_LAMP OUTPUT Muting lamp output PNP active high
Table 2 - Receiver connections
5 poles M12 connector
This connector must be wired to the 5 poles M12 male connector connected to the muting arms.
WARNINGS REGARDING THE CONNECTION CABLES
•
For connections over 50m long, use cables with a cross-section area of 1 mm
2
.
•
The power supply to the light curtain should be kept separate from that to other electric power
equipment (electric motors, inverters, frequency converters) or other sources of disturbance.
•
Connect the Emitter and the Receiver to the ground outlet.
•
The connection cables must follow a different route to that of the other power cables.
M12 - 5 poles
(To the sensors
connector)
M16 - 12 poles