page 12
Clean the bottle or the baby food jar thoroughly
before the disinfection process and remove all food
particles and residues.
Place the bottle opening down into the container (fits
2 standard baby bottles or one wide-mouth bottle).
Accessories can also be placed into the container.
Add 30 ml of water into the reservoir.
Replace the lid and connect the device to a wall socket.
Adjust the dial to the disinfecting function.
Push the dial to start the disinfecting process.
The red light display will be lit signaling that the
device is in use and performing the disinfecting
function. The light will turn off after the process has
been completed.
Caution:
Wait about 1 minute before removing the lid in order to avoid scalding.
Remove the bottles. For safety reasons, disconnect the power cord after use.
Disinfecting
5. Disinfecting baby bottles and jars
This multifunctional device contains a disinfecting function. It will destroy bacteria and germs in bottles and
accessories.
CAUTION:
The disinfecting function is not possible
with the 12-volt adapter.
