MCT1 / MCT2
QUICK INSTALLATION GUIDE
R
EE
R S.p.A.
Via Carcano 32, 10153 Torino Italia
2
Tel. +39 0112482215 r.a. Fax +39 011859867
Sito web: www.reersafety.com - email: [email protected]
C) MORSETTIERE - TERMINAL BLOCKS - BORNIERS - ANSCHLUSSKLEMMEN - TERMINALES
PIN
CABLE
CONNECTIONS
SIGNAL
TYPE
MCT1
MCT2
1
24VDC
24VDC
Power supply 24VDC
2
n.c.
n.c.
-
3
BRAIDING CH1
BRAIDING CH1
-
4
0VDC
0VDC
Power supply 0VDC
5
n.c.
n.c.
-
6
n.c.
n.c.
-
7
n.c.
BRAIDING CH2
8
n.c.
n.c.
-
9
First pair
twistate
conductors
CH1 - A
CH 1 - A
Be sure to connect to the corresponding
terminals of the remote MCT:
A <-> A
B <-> B
C <-> C
D <-> D
BRAIDING
<->
BRAIDING
You can also connect CH1 with CH2 (MCT2)
10
CH1 - B
CH 1 - B
11
Second pair
twistate
conductors
CH1 - C
CH 1 - C
12
CH1 - D
CH 1 - D
13
First pair
twistate
conductors
n.c.
CH 2 - A
14
n.c.
CH 2 - B
15
Second pair
twistate
conductors
n.c.
CH 2 - C
16
n.c.
CH 2 - D
MCT1
=> 1 independent connection channel
MCT2
=> 2 independent connection channels
The system response time does not change with the use of MCT modules.
Refer to the manual for wiring details in the different operation mode
D) ESEMPI DI CONFIGURAZIONE - CONFIGURATION EXAMPLE - EXEMPLE DE CONFIGURATION - KONFIGURATIONSBEISPIEL - EJEMPLO DE CONFIGURACIÓN
The connection of two MCT2 can be performed by wiring a channel of your choice.
The connection of the MCT1 must be connected as the first or last module.
The picture shows a configuration with 2 MCT1 module (first and last position) and 2 MCT2 module between them.
To connect the MCT modules, R
EE
R advise to use a MC series cable (i.e. MC25, MC50) depending on the necessary length to be covered.
MCT1
MCT1
MCT2
MCT2
MC cable
MC cable
MC cable
