Programming
The programming card enables simple programming of various speed controller settings.
There are two plug options on the programming card front. The right socket when viewed
from the front serves external voltage supply of 4.8 to 8.4 V/DC if the speed controller to be
programmed does not have any BEC system. The left socket is intended for connection of the
speed controller.
Observe correct polarity when connecting it. For this, observe the marks on the
programming card casing.
The programming card is suitable for several types of speed controllers. Depending
on type (e.g. crawler), the speed controller is connected directly via its servo con-
nection cable or via the fan connection of the speed controller.
Connection takes place via the fan connection when the fan is connected to the
speed controller via a servo plug. In this case, a plug assignment and the text "PRG"
at the speed controller are evident as well.
Remove the plug from the connection cable of the fan at the speed controller. Ob-
serve connection in the proper polarity and use the servo cable from the delivery
scope of the programming card for connecting the programming card and speed
controller.
Proceed as follows to programme the speed controller:
• Switch off the speed controller.
• Connect the speed controller servo plug (or the fan connection, see note above) to the pro-
gramming card. Observe the right polarity of the servo plug: (black or brown = minus/-).
The voltage/current supply is usually achieved by a so-called BEC system inte-
grated in most speed controllers and using the receiver power supply from the drive
battery.
If the speed controller to be programmed does not have this BEC system, the pro-
gramming card has to be additionally supplied from an external power supply. For
this, plug a suitable receiver battery (4.8 to 8.4 V) into the left connection socket in
addition to the speed controller servo socket of the speed controller. Always ensure
correct polarity.
• If the programming card is operated with external voltage, the speed controller must be
switched on before the external supply voltage. Observe correct polarity as well as the
amount of the supply voltage (max. 8.4 V/DC).
• Connect the speed controller to the drive battery and switch on the speed controller. The
indicator LED of the speed controller and the left and right display indicators of the program-
ming card light up.
The left display indicates the programming function (e.g. 1 = driving mode). The right display
shows the value currently stored for this in the speed controller.
The programming card is suitable for a speed controller series of crawler, onroad
and offroad versions. The selectable functions are the same for all three vehicle
types. The set values for the crawler versions are, however, different from the on-
road and offroad versions.
The set values that are programmable for the individual speed controller types (e.g.
crawler) and functions (e.g. driving mode) can be taken from the information on the
programming card.
• Use the button "ITEM" to select the desired function (e.g. 1 = driving mode) to be changed
(endless loop).
• Use the button "VALUE" to change the set value for the chosen menu item (e.g. 1 = driving
mode in the left display). The set value in the right display moves one step up each time you
push the button "VALUE" (endless loop).
• Save the newly selected setting in the speed controller by pushing "OK".
The display of the programming card is concealed for a brief moment and then shows the
value just saved.
• If you want to perform any other settings to other menu items, proceed accordingly (button
"ITEM" = Select function; button "VALUE" = Change set value).
• Use the button "RESET" to reset the speed controller to its basic settings. Save this basic
setting with the button "OK" in the speed controller.
• Switch off the speed controller again after programming and disconnect it from the drive bat-
tery after making and saving all settings.
• Pull the speed controller servo plug from the programming card and connect the plug to the
intended receiver slot again.
If programming used the fan connection of the speed controller, the fan must be connected
again after programming (observe proper polarity!).
• Your model can now be operated with the newly programmed speed controller.
Operating instructions
Programming Card "PK04"
Item No. 1456605
Intended Use
The programming card serves to program a speed controller series for crawler, onroad and
offroad versions. For this, observe the notes with the product on our website. Programming
the speed controller enables you to adjust your model's driving characteristics to your personal
habits.
For reasons of safety and approval, the product must not be converted and/or changed by
you. Using the product for any other purposes than those described above may damage the
product. Improper use also may cause dangers such as short circuit, fire, etc. Read the operat-
ing instructions precisely and keep them. Only pass the product on to any third parties together
with the operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Scope of Delivery
• Programming card
• Cable "servo plug to servo plug"
• Operating Instructions
Current operating instructions
Download the current operating instructions via the link www.conrad.com/downloads or scan
the displayed QR code. Follow the instructions on the website.
Explanation of Symbols
The exclamation mark in a triangle indicates important notes in these operating
instructions that must be observed strictly.
The arrow symbol indicates that special advice and notes on operation are provided.
Safety Information
Read the operating instructions attentively and particularly observe the safety
notes. If the safety notes and the information in these operating instructions
regarding proper handling are not observed, we assume no liability for any
resulting injury/property damage. In such cases, the warranty/guarantee will
also lapse.
• The unauthorised conversion and/or modification of the product are prohibited
for safety and approval reasons. Never disassemble the product. There are
no components inside the casing that need to be adjusted or serviced by you.
Furthermore, this will render the guarantee/warranty void!
• The product is not a toy and must be kept out of the reach of children!
• The programming card must not become damp or wet.
• Before connecting the programming card, observe the operating instructions of
the respective speed controller.
• Do not leave packaging material unattended. It may become a dangerous toy for
children.
• In case you have questions which are not answered in these operating instructions,
contact our technical service or other specialists.