5
5. Product Description
The electronics are not protected from moisture and other environmental influences
and must only be used inside the model. The in- and outputs have common plug
contacts or soldering contacts.
The “QC06” lightboard is an electronics PCB ready for operation that enables different functions
in a model.
1. Control of up to 6 super-light Power-LEDs
The lightboard has two switchable outputs with active power control; 1 - 3 super-light power
LEDs can be connected to each of them.
2. Control of light effects and displays
The lightboard has 8 LED-outputs that can be connected either to individual LEDs with the
required input resistor or 12 V-LED-strips. The LEDs or LED-strops can be used as running
lights, flashlight or to display operating conditions of the “QuadroCopter”. Channel 5-8 or an
external PPM signal can be used to switch the respective light patterns. A buzzer is available for
acoustic output of warning signals.
3. Servo connection
Up to 4 servos (channels 5 - 8) can be connected to the lightboard and are then directly controlled
by the main control of the “QuadroCopter”.
