Reefe 22603 Скачать руководство пользователя страница 6

Страница: 6 / 13

www.

reefe

.com.au

Ascento Group Australia

AI.062020

P: 1800 807 604

IMPORTANT INSTALLATION & WARRANTY CONDITIONS - EXTERNAL PUMPS

1) The mains supply must not exceed 500kPa refer AS/NZS 3500.1

2) The pump must have flooded suction (gravity feed of tank-water) with an inlet pipe not less than the size of the pump inlet (typically 25mm)

3) The suction must have a Y-Strainer fitted (on the inlet from tank)

4) Mains supply must have an isolation valve (ball-valve)

5) Tank supply must have an isolation valve (ball-valve)

6) ALL CONNECTIONS must be with Barrel-Unions

7) Most pump warranties are conditional upon a pump cover being fitted

IMPORTANT INSTALLATION & WARRANTY CONDITIONS - SUBMERSIBLE PUMPS

1) The mains supply must not exceed 500kPa refer AS/NZS 3500.1

2) The pump must be easily accessible for repair or servicing

3) If the pump has a float switch, ensure it CANNOT get stuck on the side of the tank or under baffles or similar -warranty service does not cover this situation.

4) Mains supply must have an isolation valve fitted (ball-valve)

5) ALL CONNECTIONS must be with Barrel-Unions

6) For underground tanks, the installation must be designed and constructed to allow easy access, for removal or replacement of the pump, warranty does not

include costs of digging up gardens etc!

MAINTENTANCE

The RM1500-2 or RM1600-2 Valve does not require any regular maintenance however there are things you can do to ensure its most reliable operation.

• Fit a Y-Strainer

• Cleaning your gutters

• Cleaning the inlet strainer on rainwater tank

WARRANTY INFORMATION

RM1500-2 and RM1600-2 warranty for Australia and New Zealand

The RM1500-2 and RM1600-2 valve is guaranteed for a period of 2 years from the date of original purchase to be free of material or manufacturing defects.

Should any part fail as a result of such defects within this period, the RM1500-2 and RM1600-2 valve will be repaired or replaced by the manufacturer, free of

charge. The RM1500-2 and RM1600-2 valve also has a LIMITED LIFETIME WARRANTY on all brass components, any brass component will be replaced free of

charge if it fails in normal use during its life.

This warranty applies in all states and territories in Australia and New Zealand. The warranty period commences on the day of the original purchase of the

RM1500-2 and RM1600-2 valve. Evidence of this purchase must be provided when claiming repairs or replacement, it is recommended you retain all receipts.

Both warranties are subject to conditions by the original purchaser with all conditions set out in the installation and operating instructions. Failure to comply with

these instructions, damage or breakdown caused by fair wear and tear, negligence, misuse, incorrect installation, chemical or additives in the water, corrosive or

abrasive water, inadequate conditions, attempting repairs or accidents, are not covered by this warranty.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. If you are a consumer as defined by the Australian Consumer Law,

you are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The above conditions form

part of the instructions and do not over-ride your statutory rights.

TROUBLESHOOTING
SYMPTOM

CAUSE

REMEDY

No water is delivered from pump or

pump performance is decreased

Rainwater tank is empty. No Power. Isolation Valve

is shut. Pump is not primed. Y-Strainer is blocked.

Wait for tank to fill.

Check power supply & plug. Restart pump.

Open isolation Valve.

See pump owners manual on priming pump. Clean Y-Strainer.