reedinstruments
www
com
2
Table of Contents
Safety ...................................................................................................... 2-3
Features .......................................................................................................4
Instrument Decription ..................................................................................4
Specifications
.......................................................................................... 5-9
Operating Instructions ........................................................................... 9-11
Safety
The following safety information must be observed to insure maximum
personal safety during the operation of this meter:
• Do not use the meter if the meter or test leads look damaged, or if you
suspect that the meter is not operating properly
• Never ground yourself when taking electrical measurements. Do not
touch exposed metal pipes, outlets, fixtures, or anything which might be
a grounding potential
• Keep your body from grounding by wearing dry clothing, using rubber
shoes, rubber mats, or any other approved insulating material
• Ensure that you isolate the circuit and that there is no electrical current
running through it before you cut, unsolder, or break it. Small amounts
of current can be dangerous
• Use caution when working above 60V DC or 30V AC RMS. Such volt
-
ages are a shock hazard
• When using the probes, keep your fingers behind the finger guards
• Measuring voltage which exceeds the limits of the Multimeter may
damage the meter and expose the operator dangerous currents of
electricity. Always recognize the meter’s voltage limits as stated on the
front of the meter.
