reedinstruments
www
com
10
Cables
Disconnect the cable from the line. Also disconnect opposite end to avoid
errors due to leakage from other equipment. Check each conductor to
ground and /or lead sheath by connecting one megohmmeter lead to a
ground and /or lead sheather and the other megohmmeter lead to each of
the conductors in turn. Check insulation resistance between conductors
by connecting megohmmeter leads to conductors in pairs.
For service on this or any other REED product, contact REED Instruments
at [email protected].
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com