
reedinstruments
www
com
Operation
NOTICE:
Read. and. understand. all.
warning
. and.
precaution
. state-
ments. listed. in. the. safety. section. of. this. operation. manual. prior. .
to.using.this.meter..Set.the.function.select.switch.to.the.OFF.position.
when.the.meter.is.not.in.use.
AC/DC Current Measurements
WARNING:
Ensure.that.the.test.leads.are.disconnected.from.the.meter.
before.making.current.clamp.measurements.
1..Set.the.Function.switch.to.the.
400ADC, 40ADC, 400AAC or 40AAC
range..If.the.range.of.the.measured.is.not.known,.select.the.higher.
range first then move to the lower range if necessary.
2..Press.the.trigger.to.open.jaw..Fully.enclose.one.conductor.to.be.measured.
3..The.clamp.meter.LCD.will.display.the.reading.
DC/AC Voltage Measurements
1..Insert.the.black.test.lead.into.the.negative.
COM
.terminal.and.the.red.
test.lead.into.the.positive.
V
.terminal.
2..Set.the.function.switch.to.the.
V
.position.
3..Select.AC.or.DC.with.the.
MODE
.button..
4..Connect.the.test.leads.in.parallel.to.the.circuit.under.test.
5..Read.the.voltage.measurement.on.the.LCD.display.