
reedinstruments
www
com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Backlight
Press the Backlight/Unit button to turn the backlight on and off.
Distance Unit Setting
Hold down the Backlight/Unit button for a few seconds to change the unit
of measure. Continue to press the button to toggle between all units of
measure. You can choose between m, ft, in, and ft + in.
Single Distance Measurement
Press the On/Measure button to activate the laser. Press the button
again to trigger the distance measurement. The measured value will be
displayed immediately.
Continuous (Tracking)/Max & Min Measurement
The continuous measurement function (tracking)
is used for the transferring of measurements
(ie: from construction plans). In continuous
measurement mode, the measuring tool can be
moved to the target, whereby the measured value
is updated approx. every 0.5 seconds.
The corresponding max and min values are
displayed dynamically in the first and second line.
For example, the user can move from a
wall to the required distance, while the
actual distance can be read continuously.
For continuous measurement, press the Max/Min
button until the indicator for continuous measurements
appears on the display. Press it again or press the On/Measure button
to stop the function. The function is terminated after 100 continuous
measurements.
www.reedinstruments.com
1-877-849-2127 | [email protected]