
reedinstruments
www
com
10
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
Current Clamp Measurements
Note, the Optional Clamp Meter is required to make Current Clamp
Measurements.
1. Set the Function Switch to the 60A position.
2. Insert the Red wire into from the Clamp Meter into the VΩHz%
Input and the Black wire into the COM Input.
3. Press the jaw trigger on the Clamp Meter and place it around one
wire to be measured. Read the results on the LCD.
Non-Contact AC Voltage Sensing
1. Set the Function Switch to the NCV position.
2. Place the front end of the meter near the object to be sensed.
3. Critical voltage will be displayed as “-”. Varied buzzing sounds
and line marks on the LCD will appear in accordance with the level
of sensed Voltage.
Max/Min Display
While taking a measurement, press the MAX/MIN button to display
the Maximum measured value. Press the button again to display the
Minimum measured value. Press the button a third time to resume normal
measuring.
Relative Measurements
While taking a measurement, press the REL button to use the displayed
value as a reference point. The displayed measured value will be the
difference between what is being measured and the reference point. Press
the button again to resume normal measuring.
Display Hold
Press the HOLD Button to freeze the displayed value. Press the button
again to resume normal measuring.