REED R3002 Скачать руководство пользователя страница 5

reedinstruments

www

com

5

Pantone 534 Blue

Pantone 123 Yellow

Pantone 485 Red

Pantone 123 Yellow

Pantone 534 Blue

Black

Rich Black - 

20/20/20/100

Blue -  100/80/30/5

Yellow - 0/27/100/0

Red - 10/100/100/5

Yellow - 0/27/100/0

Blue -  100/80/30/5

Only if you REALLY need them:

Pantone 534 Blue -  100/80/30/5

Pantone 485 Red - 10/100/100/5

Pantone 123 Yellow - 0/27/100/

Display Description

1.  Hold Function            
2.  Differential Mode
3.  Primary Data screen
4.  Record Mode
5.  MAX/MIN/AVG
6.  Low Battery indicator
7.  Pressure Unit indicator
8.  Relative Time Clock
9.  Data output from USB 

Operating Instructions

Turning the unit on

Press the ON/OFF button to turn power on or off. The meter will perform 
a short self-test when turned on. The meter will default to the last setting 
used during operation.

Zero Adjust and Offset

To Zero Adjust and Offset the meter, turn the meter on, without any fitting 
attached. Press the HOLD button for about 2 seconds to zero the meter. 
The meter will reset displaying “0 0 0 0” on the LCD screen, changing to 
“0.000”. If you want to offset the meter and display, press the DIF button 
while taking a measurement. Subsequent readings will be the 
difference between the current measurement and the measurement that 
was on the display when the DIF button was pressed.

Data Hold

Press the HOLD button momentarily to freeze the displayed reading. The 
‘HOLD’ icon will appear on the upper left-hand side of the display. If the 
pressure value is over the range, error codes will show on the screen. 
Press the HOLD button again to return to normal operation.

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Содержание R3002









Отзывы: