REED Muse3C, Руководство пользователя, Страница: 9 / 9

Figure 22
18. Tonearm mounting position, depending
on its length, is changed by turning
(relatively to each other) two tonearm
mount base discs – outer (big), which is
fixed using a screw (Figure 22) and inner
(small), depicted in Figure 23. For a
screw fastening please use s=1,5mm hex
(Allen) key (included).
Figure 23
19. To mount tonearms with different
mounting patterns, please use different
inner tonearm mount base discs (small).
20. If turntable is not used for more
than 7 minutes, it goes to sleep
mode – just the red 0 LED indicates
that turntable is connected to the
power supply. Turntable returns to
operation mode after pressing any
of the buttons or moving the
platter. 21. To toggle turntable speed indication
(green light from under the platter)
between on and off, please press the "0"
button and the "45" button at the same
time.