REED Muse1C, Руководство пользователя, Страница: 4 / 8

Figure 7
Figure 7a
7. When ordering belt drive option (Figure
7):
a) Take a belt from the box and put it on
the pulleys of both motors and the
drive wheel.
b)
release screws marked A, turn the red
plate as it is shown in Figure 7a (to
prevent it touching the disk) and
tighten screws A again. You can also
completely remove the red plate.
Figure 8
8. When ordering friction drive option
(Figure 8),
a)
unscrew transportation screws
(with red caps) for both motors
b) check if motor levers can move
freely
c) release screws marked A, turn the
red plate as it is shown in Figure 8
(to prevent it touching the disk) and
tighten screws A again. You can also
completely remove the red plate.