12
www.REEDINSTRUMENTS.com
Maintenance
Cleaning the Test Piece
After taking a measurement, clean the test pieces to prevent them from
rusting. If the pieces are not being used for a long period of time coat
them with oil to prevent rust.
Protecting the Ultrasonic Sensor
Be sure to clean the ultrasonic sensor and cable after each use. Grease, oil
and dust will cause the cable to dry out and shorten life expectancy. The
temperature of the surface being measured should not exceed 140°F (60°C).
Replacing the Ultrasonic Sensor
The degradation and wear of the probe's interlayer plate will influence
measurements. Replace the probe when the following occurs:
1.
If it always displays the same value when measuring different thicknesses
2. When a measurement displays no value
Battery Replacement
1. When the low battery symbol appears on the display, replace
the batteries.
2. Remove the battery cover on the back and insert 4 x "AAA" batteries.
Applications
• Monitoring and verifying pipes and pressure vessels
• Industrial manufacturing
www.
.com
1.800.561.8187
