3
Product Quality
This product has been manufactured in an ISO9001 facility and has been
calibrated during the manufacturing process to meet stated product
specifications. If a certificate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
• Never attempt to repair or modify your instrument. Dismantling
your product may cause damage that will not be covered under the
manufacturer's warranty. Servicing should only be provided by an
authorized service center.
• When the unit needs to be washed, use water at a temperature not
exceeding 86°F (30°C).
• The prism must be cleaned thoroughly with a soft, clean damp cloth
after each use—failure to do so will result in inaccurate readings and
possible long term damage.
• Do not drop or use excessive force as it may result in damage to the meter.
• Do not scratch the prism surface.
• Do not leave the instrument in a location exposed to direct sunlight or
near a heat source for an extended period of time.
• Do not attempt to measure corrosive chemicals as it will damage
the instrument.
Features
• 0 to 55% Brix measurement range with 0.1% resolution
• Ergonomically designed for one-handed operation
• Dual LCD simultaneously displays % Brix and temperature
• Sapphire prism with abrasion and corrosion-resistant coating
• Automatic Temperature Compensation (ATC)
• Built-in Zero calibration
• Rechargeable battery
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
