Introduction
Thank you for purchasing your REED R3530 Conductivity/TDS/Salinity
Meter. Please read the following instructions carefully before using your
instrument. By following the steps outlined in this manual your meter will
provide years of reliable service.
Product Quality
This product has been calibrated during the manufacturing process to
meet stated product specifications. If a certificate of calibration is required
please contact the nearest authorized REED distributor or authorized
Service Center. Please note an additional fee for this service will apply.
Safety
Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
