background image

7

Operating Instructions

Powering On the Meter

The display should switch on when the battery is installed. If the display 
does not switch on, replace the battery.

Clock and Alarm Modes

In order to set the clock or alarm the correct mode must be selected by

pressing the 

ALM

SET

 button.

1.  When in clock mode the ":" symbol between the hour and minute  

will flash.

2.  When in alarm mode the ":" symbol appears between the hour and 

minute but does not flash. If an alarm is already set the Alarm icon 

ALM

SET

 will also flash to indicate the alarm mode function.

To toggle between both modes press the 

ALM

SET

 

button.

Setting the Clock

When in clock mode, press and hold the 

ALM

SET

 button for 2 seconds and the 

clock minutes will flash.
1.  To adjust the minutes, press or press and hold the 

ALM

SET

 button until the 

desired value is reached.

2.  Next, press the 

ALM

SET

 button to switch to the hour digit. Press or press 

and hold the 

ALM

SET

 button until the desired value is reached.

3.  Press the 

ALM

SET

 button to toggle the AM/PM indicator on or off. When 

off, the clock will be displayed in 24 hour format.

Setting the Alarm

When in alarm mode, press and hold the 

ALM

SET

 button for 2 seconds and the 

clock minutes will flash.
1.  To adjust the minutes, press or press and hold the 

ALM

SET

 button until the 

desired value is reached.

2.  Next, press the 

ALM

SET

 button again to switch to the hour digit. Press or 

press and hold the 

ALM

SET

 button until the desired value is reached.

3.  Press the 

ALM

SET

 button again to set the alarm to on or off. Press the 

ALM

SET

 

button to toggle the Alarm icon 

ALM

SET

 on or off.

continued...

 

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Содержание 800837004321











Отзывы: