STREAM EXTENDED BASIN MIXER CHROME
INSTALLATION INSTRUCTIONS
Plumbers, please ensure a copy of the Installation
Instructions are left with the end user for future reference
Note
Mixer must be installed by a licenced plumber
Important
Your mixer comes to you already factory assembled and tested. We do not recommend the dis-
mantling of any internal part of the mixer. The mixers are factory tested and sealed so as to give
the best performance.
Installation Procedure
1. Please flush out new pipe work prior to connecting the new mixer
2. All mixers should be installed with isolating stop cocks (Arco)
3. This tap is suitable for high pressure applications where both hot and cold water supply
pressures are at 150kPa or above
4. Place the base washer & dress ring (14) into position
5. Fit the tap body into the basin hole making sure first that the flexible connectors are firmly
tightened into base of the body
6. Do not use teflon tape on threads
7. From underneath apply your washer prior to positioning the horse shoe plate
8. Lock the mixer into position by tightening the lock nut
Servicing - Replacement of Cartridge
1. Remove cap and unscrew grub screw using allen key
2. Lift off handle and remove cartridge dome, unscrew brass locking nut and lift out cartridge
3. Replace cartridge, brass locking nut and handle. Tighten grub screw and push in indicator
cap
Servicing - Flow Regulator (If flow rate drops)
1. Remove cartridge as outline above.
2. Remove flow regulator (7) and flush with water or replace.
