METHVEN
SATINJET ESCAPE MKII
HI RISE SHOWER
CLEANING RECOMMENDATIONS
This bathroom product should not be cleaned with abrasive materials eg.
steel wool/scourers. Do not use any corrosive or abrasive cleaning agents
containing acids or scouring agents. Bleaches can also discolour products
and therefore should not be used. Damage caused by any improper
treatment is not covered by the product warranty- refer to Warranty
Conditions on the last page.
To see the full METHVEN range at Reece go to
www.reece.com.au/bathrooms
SPECIFICATIONS
Recommended Use
Domestic, hotel and commercial
Colour
Chrome with satin chrome face
Chrome with white face
Pressure Rating
Suitable for high pressure applications and has
been WELS certified to the following:
Minimum operating pressure 150kPa
Maximum operating pressure 500kPa
Temperature Rating
Maximum continous working temperature 70˚C
(recommended 38˚C - 42˚C)
Minimum 1˚C
Suitable Hot Water
Units
Storage Tank: Yes
Continous Flow: Yes
Gravity Feed: Not recommended
WELS
Stars: 3
Flow rate: 9L/min
Standards
AS/NZS 3662
Spray Patterns
Standard Satinjet; Massage
Disclaimer:
Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1
AS3662
WMKT21090
Variabl e
1/2 BSP Femal
e
Ellipse
153
240
62
11
3
62 x 80
page 1 of 3
The more
stars the more
water efficient
WATER RATING
www.waterrating.gov.au
In accordance with AS/NZS 6400
Licence No. 0095
Methven Australia Pty Ltd
9.0
litres per
minute
