of 09
Ÿ
If using a sink with an integral waste
(1)
then using two pieces of the
same size timber
(2)
will be required to measure the height.
Ÿ
Place the timbers
(2)
as shown so the protruding waste
(1)
sits
between, then lay the sink flat.
Frame
Ÿ
This style of wooden frame is required to support the shelf which the
Double Bowl Sink will sit onto. Four support legs will also be
required however these are cut once the height measurements have
been calculated.
Ÿ
across the top, measure the height as shown.
Place your Sink
(1)
onto a flat surface then using a straight edge laid
Page 02
2
2
1
