Kado Lussi MKII Heated Towel Rail
Installation Instructions
Electrician, please ensure a copy of the installation
instructions is left with the end user for future reference
Page 5 of 7
Kado Lussi Heated Towel Rail Wall Mount
HARD WIRING
We
recommend
that all hard-wired heated towel rails
be connected to a light switch or digital timer. Connecting hard-
wired heated towel rails to a light switch or a timer will prolong the
life
of the electric element and reduce energy consumption.
CHANGING ELEMENTS
Replacing a heating element, or exchaging it from one side to the
other is a realtively simple process.
There are Five Basic Steps:
1. Remove towel rail from brackets (if already installed).
3. Pull element cable back through vertical rail so that it protrudes
from bottom. With a 19mm tap spanner, loosen
the hex nut of the electric element. When the element is
, unscrew it by hand. If you are changing the element
from left to right (or vice versa) the internal plug on the
opposite side must also be removed and swapped over with the element.
loose
4. Swap the element and screw in place.
5. Turn the towel rail the right way up and position back into
brackets, re t grub screws to secure.
Element
on left side
Turn rail
upside down
Swap
element over
Element
on right side
2.
3.
4.
- 19mm Tap Spanner
Required
unscr
ew in
ter
nal cap
unscr
ew elemen
t
scr
ew in elemen
t
scr
ew in in
ter
nal cap
2. Turn towel rail upside down and remove both push on caps
from bottom of vertical tube.
1.
Please note:
We
advise that the unit be removed from the wall and turned
upside down to avoid water spilling. Please ensure
the heating element always remains at the bottoom of the towel rail.
Remo
ve push on caps
Refit push on caps
