11
10. While a second person holds the Console (74)
near the Upright (2), connect the wires on the
Console to the Pulse Jumper Wire (76) and to
the Upper Wire Harness (77).
Insert the excess wire into the Upright (2) or into
the Console (74).
Tip: Avoid pinching the wires.
Attach the
Console (74) to the Upright (2) with four M4 x
16mm Screws (47).
10
2
47
77
76
74
11. Attach the Water Bottle Holder (26) to the Frame
(1) with two M4 x 22mm Screws (57).
11
1
26
57
12.
Make sure that all parts of the elliptical are properly tightened.
Cover the floor beneath the elliptical to
protect the floor from damage. Note: Some extra hardware may be left over.
Avoid pinching
the wires
All manuals and user guides at all-guides.com
all-guides.com
