12
12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 22 and 23).
51
49
12
3
13
80
Large
Barrel
11
11. Raise the Frame (49) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (51) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (51) to
the Base (80) with a 3/8" x 2" Bolt (13) and a 3/8"
Nut (3).
Attach the upper end of the Storage Latch (51)
to the Frame (49) with a 3/8" x 1 3/4" Screw (12).
Lower the Frame (49) (see HOW TO LOWER
THE TREADMILL FOR USE on page 20).
10. Fully tighten the six 3/8" x 3 1/2" Screws (4)
(three on each side).
4
Latch
Knob
10
4
Содержание Challenger 150 Cwl Treadmill
Страница 26: ...26 NOTES ...