background image

22

FEATURES OF THE CONSOLE

The advanced console offers an array of features 
designed to make your workouts more effective and 
enjoyable. 

The console features revolutionary iFit technology that 
enables the console to communicate with your wireless 
network. With iFit technology, you can download per-
sonalized workouts, create your own workouts, track 
your workout results, and access many other features. 

See www.iFit.com for complete information.

In addition, the console features a selection of onboard 
workouts and several iFit demo workouts. Each work-
out automatically controls the resistance of the pedals 
and the incline of the ramp and prompts you to vary 
your pedaling speed as it guides you through an effec-
tive exercise session. You can also set a customized 
workout goal with the set-a-goal workout.

When you use the manual mode of the console, you 
can change the resistance of the pedals and the incline 
of the ramp with the touch of a button. 

While you exercise, the console will display continuous 
exercise feedback. You can also measure your heart 
rate using the handgrip heart rate monitor or the chest 
heart rate monitor. 

You can even browse the Internet or listen to your 
favorite workout music or audio books with the console 
sound system while you exercise.

To turn on the power,

 see page 22. 

To learn how 

to use the touch screen,

 see page 23. 

To set up 

the console,

 see page 23.

 HOW TO TURN ON THE POWER

IMPORTANT: If the elliptical has been exposed to 
cold temperatures, allow it to warm to room tem-
perature before turning on the power. If you do not 
do this, you may damage the console displays or 
other electrical components.

Plug in the power cord (see 
HOW TO PLUG IN THE 
POWER CORD on page 
19). Next, locate the 
power switch on the frame 
near the power cord. Press 
the power switch to the 
reset position.

The display will then turn on and the console will be 
ready for use.

Note: When you turn on the power for the 

 rst 

time, the incline of the ramp may calibrate auto-
matically.

 The ramp will move upward and downward 

as it calibrates. When the ramp stops moving, the ramp 
is calibrated.

IMPORTANT: If the incline of the ramp does not 
calibrate automatically, see step 4 on page 31 
and manually calibrate the ramp.

IMPORTANT: The console features a display demo 
mode, designed to be used if the elliptical is dis-
played in a store. If the demo mode is turned on, 
the console will show a preset presentation when 
you 

 nish exercising. To turn off the demo mode, 

see step 6 on page 29.

Reset 

Position

Содержание 1410 Elliptical













































Отзывы: